Ball Transfers
PBT Ball Transfers
are designed for use
in virtually all work
surface applications.
Omtec PBT Ball Transfer
have no pinch points!
ESD grounding studs
are available.
Minimal effort movement
quick loading,
convenient positioning,
firm locating.
5-2 PF Explore The Unique Omtec Ergonomic PBT Pop Up Ball Transfer
Printer Friendly This Page
Omtec PBT pop up ball transfers
Omtec PBT Pop Up Ball Transfers (5-2)
 
Omtec PPD Positioner Pads (5-3)
 
Omtec Insert Rollers (5-4)
 
Omtec Insert Wheels (5-5)
 
Omtec FBT Fixed Ball Transfers (5-6)
 
Omtec Pop Up ESD Ground Unit (5-7)
 
Ball Transfer Capacity (5-8)
 
Omtec PBT Pop Up Ball Transfers
Virtually any air control device may operate Omtec Pop Up Ball Transfers. In the majority of applications simple non electric foot and hand valves may be used. Sensing device operated electric solenoids valves may also be used.

Omtec Pop Up Ball Transfers like virtually all pneumatically operated components, require Filtered, Regulated and Lubricated compressed air to operate. Omtec has FRL kits, Non-detent foot valve kits and detent toggle hand valve kits available. Other controls supplied on request. The regulator should be set at 50 PSI (3.447 bar). Omtec pop up ball transfer units use very low air volume, it is usually not a consideration. Each up and down cycle of one ball uses .00038 cubic feet (.0000108 cubic meter).

Carbide bits for boring and recessing holes in plastic & wood composite surfaces.

Omtec has available correct size carbide tipped bits to easily bore holes for Pop-Up Ball Transfers. 1/2 inch (13mm) hand drill required. If recessed flanges are desired, Omtec also has available the correct size carbide tipped rabbeting bits. 1/4 inch (6.35mm) trim routers. Minimum metal surface thickness: Steel 0.092 inches (2.34mm), Aluminum 0.125 inches (3.18mm). Depending on individual applications, ribbed reinforcement of all surfaces is an important consideration.
 
Ball Transfer Weight Capacity:50 lbs (22.68 kg)
Ball transfer weight capacity is deceptive!

Many factors override the actual rated capacity of a ball transfer. Experience indicates when all factors are considered, the most successful live load rates of ball transfers falls between 5 to 30 lbs. (2.27 to 13.61 kg) per ball transfer. For a better understanding of ball transfer loading...

Click: About any ball transfers


For two examples of Omtec PBT Pop Up Ball Transfer
applications, one in combination with Ball Transfers
and the other with Insert Wheels, click on pictures.


Omtec PBT ball transfers...
are designed to use in combination
all of the other Omtec Ergonomic Tranfers



They are ideal with Omtec:
PPD Positioner Pads, FBT Ball Transfers,
Insert Wheels, Insert Rollers and the
ESD PUG Grounding Device
Home Page Put Omtec's field ingenuity to work for you.
Free support is only a phone call or email away! 		Email Omtec
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Sign up for our Email Newsletter
*Covered under one or more U.S. and international patents. Copyright © 2000-2008 Omtec Corp.
181 Liberty Street, Marlboro, MA 01752 USA | Phone: (508) 481-3322 | Fax: (508) 460-0105

All images are the exclusive property of Omtec Corp. with all rights reserved.
Images may not be copied or reproduced without prior explicit permission of Omtec Corp.
5-2